nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Docker edition Al fresco install problem

deepakdeshp

Hello,

I am trying to install Docker Alfresco but am getting error. The link I am following is

ALF docker install process . I am using 64 bit Ubuntu server 18.04 which is fully updated.

git clone https://github.com/Alfresco/acs-community-deployment.git
Cloning into 'acs-community-deployment'...
fatal: unable to access 'https://github.com/Alfresco/acs-community-deployment.git/': server certificate verification failed. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none

Please suggest

Find more posts tagged with

Alfresco Content Services

Accepted answers

fedorow

Alfresco docker-compose deployment minimum memory requirement is 12GB. It can starts on 8GB, but without any others application.

You use VM with 4GB memory. So try to start it directly on your 8Gb mint or take bigge vm.

All comments

fedorow

install docker
install docker-compose
download yaml file
run docker-compose

Commands to do so on ubuntu 18.04 is bellow:

sudo apt-get update
sudo apt-get install \
apt-transport-https \
ca-certificates \
curl \
gnupg-agent \
software-properties-common
curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -
sudo apt-key fingerprint 0EBFCD88
sudo add-apt-repository \
"deb [arch=amd64] https://download.docker.com/linux/ubuntu \
$(lsb_release -cs) \
stable"
sudo apt-get update
sudo apt-get install docker-ce docker-ce-cli containerd.io
sudo curl -L "https://github.com/docker/compose/releases/download/1.24.0/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose
sudo chmod +x /usr/local/bin/docker-compose

sudo wget https://github.com/Alfresco/acs-community-deployment/blob/master/docker-compose/docker-compose.yml

sudo docker-compose up

deepakdeshp

Thank you.

The following error I am getting.

sudo add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu\
$(lsb_release -cs) \
stable"
E: Malformed entry 65 in list file /etc/apt/sources.list (Component)
E: The list of sources could not be read.

65th line in /etc/apt/sources.list is

deb [arch=amd64] https://download.docker.com/linux/ubuntubionic stable

Please suggest.

deepakdeshp

I changed the line 65 in and was able to go to the next step. But I had further errors.

sudo apt-get install docker-ce docker-ce-cli containerd.io
Reading package lists... Done
Building dependency tree
Reading state information... Done
containerd.io is already the newest version (1.2.5-1).
docker-ce-cli is already the newest version (5:18.09.5~3-0~ubuntu-bionic).
docker-ce is already the newest version (5:18.09.5~3-0~ubuntu-bionic).
uma@mail:~$ sudo curl -L "https://github.com/docker/compose/releases/download/1.24.0/docker-compose-$(uname-s)-$(uname -m)" -o /usr/local/bin/docker-compose
uname-s: command not found
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- 0:00:05 --:--:-- 0
curl: (60) SSL certificate problem: unable to get local issuer certificate
More details here: https://curl.haxx.se/docs/sslcerts.html

curl failed to verify the legitimacy of the server and therefore could not
establish a secure connection to it. To learn more about this situation and
how to fix it, please visit the web page mentioned above.
uma@mail:~$ sudo chmod +x /usr/local/bin/docker-compose^C
uma@mail:~$ sudo curl -L "https://github.com/docker/compose/releases/download/1.24.0/docker-compose-(uname-s)-(uname -m)" -o /usr/local/bin/docker-compose
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- 0:00:15 --:--:-- 0
curl: (60) SSL certificate problem: unable to get local issuer certificate
More details here: https://curl.haxx.se/docs/sslcerts.html

curl failed to verify the legitimacy of the server and therefore could not
establish a secure connection to it. To learn more about this situation and
how to fix it, please visit the web page mentioned above.
uma@mail:~$ -s)-$(uname -m)" -o /usr/local/bin/docker-compose
-bash: syntax error near unexpected token `)'
uma@mail:~$ sudo chmod +x /usr/local/bin/docker-compose
uma@mail:~$ sudo wget https://github.com/Alfresco/acs-community-deployment/blob/master/docker-compose/docker-compose.ym
--2019-08-18 03:29:04-- https://github.com/Alfresco/acs-community-deployment/blob/master/docker-compose/docker-compose.ym
Resolving github.com (github.com)... 198.44.252.107
Connecting to github.com (github.com)|198.44.252.107|:443... connected.
ERROR: cannot verify github.com's certificate, issued by ‘CN=localhost,OU=dev,O=vihoo’:
Unable to locally verify the issuer's authority.
ERROR: no certificate subject alternative name matches
requested host name ‘github.com’.
To connect to github.com insecurely, use `--no-check-certificate'.
uma@mail:~$ sudo docker-compose up
ERROR: yaml.scanner.ScannerError: mapping values are not allowed here
in "./docker-compose.yml", line 605, column 26

fedorow

I think you should read official docker documentation, and give an attention to test and troubleshooting tips.

Detailed instructions of docker installation you can read at Get Docker Engine - Community for Ubuntu | Docker Documentation.
To install docker-compose https://docs.docker.com/compose/install/
To solve github.com certificate problem try

sudo update-ca-certificates -f
sudo wget https://github.com/Alfresco/acs-community-deployment/blob/master/docker-compose/docker-compose.yml

sudo wget --no-check-certificate https://github.com/Alfresco/acs-community-deployment/blob/master/docker-compose/docker-compose.yml

4. Run application

sudo docker-compose up

deepakdeshp

Thank you.

Docker composer and docker are installed but the yml file gives error.

docker --version
Docker version 18.09.5, build e8ff056
uma@mail:~$ docker-compose --version
docker-compose version 1.24.0, build 0aa59064
uma@mail:~$ docker-compose up
ERROR: yaml.scanner.ScannerError: mapping values are not allowed here
in "./docker-compose.yml", line 605, column 26

The line 605 of docker-compose.yml is

fedorow

sudo...

deepakdeshp

Even with sudo same problem.

sudo docker-compose up
[sudo] password for uma:
ERROR: yaml.scanner.ScannerError: mapping values are not allowed here
in "./docker-compose.yml", line 605, column 26

fedorow

Sorry, wrong url in wget command.

Go to your work directory. Remove bad file docker-compose.yml

sudo rm docker-compose.yml

And download it again

sudo wget --no-check-certificate --content-disposition https://raw.githubusercontent.com/Alfresco/acs-community-deployment/master/docker-compose/docker-compose.yml
sudo docker-compose up

deepakdeshp

Thank you. It is pulling from the repository now. The yml file is correct.

After all the software is pulled will the command sudo docker-compose up

will it pull software again each time I give sudo docker-compose up?

fedorow

Images pulled from hub one time and you can use it local copies until you remove it. List of images

sudo docker images

Docker deployment simple and powerful, but it's important to understand the concept, how it works.

I can suggest you read about docker/docker-compose in general and this articles about Alfresco deployment:

Deploying Alfresco Content Services Community using Docker Compose

https://community.alfresco.com/community/ecm/blog/2018/11/14/deploying-and-running-alfresco-content-services-60?sr=search&searchId=610940b5-a2d5-4598-9220-297b78348ed1&searchIndex=0

deepakdeshp

Thank yo Serge, without your help I would not have installed the docker edition successfully.

deepakdeshp

I am able to start Alfresco with sudo docker-compose up.

But my server becomes so slow that even terminal stops to respond, I cant even ssh to it.

It is running as a Ubuntu 18.04 VM guest. The host is Mint 19.2. The system becomes u

Mint configuration is

inxi -Fxz
System:
Host: mint-18-uma Kernel: 5.0.21-050021-generic x86_64 bits: 64
compiler: gcc v: 8.3.0 Desktop: Cinnamon 4.2.4
Distro: Linux Mint 19.2 Tina base: Ubuntu 18.04 bionic
Machine:
Type: Laptop System: Hewlett-Packard product: HP Notebook
v: Type1ProductConfigId serial: <filter>
Mobo: Hewlett-Packard model: 80CC v: 99.53 serial: <filter> UEFI: Insyde
v: F.28 date: 05/17/2019
Battery:
ID-1: BAT1 charge: 28.7 Wh condition: 30.5/30.5 Wh (100%)
model: 131-42-6E HS04041 status: Unknown
CPU:
Topology: Quad Core model: AMD A8-7410 APU with AMD Radeon R5 Graphics
bits: 64 type: MCP arch: Puma rev: 1 L2 cache: 2048 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
bogomips: 17568
Speed: 2352 MHz min/max: 1000/2200 MHz Core speeds (MHz): 1: 2310 2: 2305
3: 2230 4: 2278
Graphics:
Device-1: AMD Mullins [Radeon R4/R5 Graphics] vendor: Hewlett-Packard
driver: radeon v: kernel bus ID: 00:01.0
Device-2: AMD Sun XT [Radeon HD 8670A/8670M/8690M / R5 M330 / M430 / R7
M520]
vendor: Hewlett-Packard driver: radeon v: kernel bus ID: 01:00.0
Display: x11 server: X.Org 1.19.6 driver: ati,radeon
unloaded: fbdev,modesetting,vesa resolution: 1366x768~60Hz
OpenGL:
renderer: AMD MULLINS (DRM 2.50.0 5.0.21-050021-generic LLVM 8.0.0)
v: 4.5 Mesa 19.0.8 direct render: Yes
Audio:
Device-1: AMD Kabini HDMI/DP Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel bus ID: 00:01.1
Device-2: AMD FCH Azalia vendor: Hewlett-Packard driver: snd_hda_intel
v: kernel bus ID: 00:14.2
Sound Server: ALSA v: k5.0.21-050021-generic
Network:
Device-1: Realtek RTL8723BE PCIe Wireless Network Adapter
vendor: Hewlett-Packard driver: rtl8723be v: kernel port: 3000
bus ID: 02:00.0
IF: wlo1 state: up mac: <filter>
Device-2: Realtek RTL810xE PCI Express Fast Ethernet
vendor: Hewlett-Packard driver: r8169 v: kernel port: 2000 bus ID: 03:00.0
IF: enp3s0 state: down mac: <filter>
IF-ID-1: vmnet1 state: unknown speed: N/A duplex: N/A mac: <filter>
IF-ID-2: vmnet8 state: unknown speed: N/A duplex: N/A mac: <filter>
Drives:
Local Storage: total: 465.76 GiB used: 125.90 GiB (27.0%)
ID-1: /dev/sda vendor: HGST (Hitachi) model: HTS545050A7E680
size: 465.76 GiB
Partition:
ID-1: / size: 145.55 GiB used: 71.13 GiB (48.9%) fs: ext4 dev: /dev/sda7
ID-2: swap-1 size: 4.98 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda8
Sensors:
System Temperatures: cpu: 64.0 C mobo: N/A
Fan Speeds (RPM): N/A
GPU: device: radeon temp: 49 C device: radeon temp: 63 C
Info:
Processes: 258 Uptime: 3m Memory: 6.75 GiB used: 1.60 GiB (23.7%)
Init: systemd runlevel: 5 Compilers: gcc: 7.4.0 Shell: bash v: 4.4.20
inxi: 3.0.32

The guest is

inxi -Fxz
System: Host: mail.test.com Kernel: 4.15.0-58-generic x86_64
bits: 64 gcc: 7.4.0
Console: tty 0 Distro: Ubuntu 18.04.3 LTS
Machine: Device: vmware System: VMware product: VMware Virtual Platform serial: N/A
Mobo: Intel model: 440BX Desktop Reference Platform serial: N/A
BIOS: Phoenix v: 6.00 date: 04/13/2018
CPU: Single core AMD A8-7410 APU with AMD Radeon R5 Graphics (-UP-)
arch: Puma rev.1 cache: 2048 KB

flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3) bmips: 4391 speed: 2195 MHz (max)
Graphics: Card: VMware SVGA II Adapter bus-ID: 00:0f.0
Display Server: N/A driver: vmwgfx
tty size: 80x24 Advanced Data: N/A out of X
Audio: Card Ensoniq ES1371/ES1373 / Creative Labs CT2518
driver: snd_ens1371 port: 2040 bus-ID: 02:02.0
Sound: Advanced Linux Sound Architecture v: k4.15.0-58-generic
Network: Card: Intel 82545EM Gigabit Ethernet Controller (Copper)
driver: e1000 v: 7.3.21-k8-NAPI port: 2000 bus-ID: 02:01.0
IF: ens33 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 42.9GB (67.6% used)
ID-1: /dev/sda model: VMware_Virtual_S size: 42.9GB
Partition: ID-1: / size: 37G used: 28G (79%) fs: ext4 dev: /dev/sda1
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: None detected - is lm-sensors installed and configured?
Info: Processes: 205 Uptime: 4 min Memory: 681.5/3921.5MB
Init: systemd Gcc sys: 7.4.0
Client: Shell (bash 4.4.201) inxi: 2.3.56
uma@mail:~$