nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

As we transition to the new Hyland Community, some post links may be temporarily disrupted as we finalize redirects. We apologize for the inconvenience and are working to resolve this as quickly as possible. Details.

resolving to port 80 instead of 8080

mholmes

is there a reason that alfresco was ported to port 8080 instead of port 80? Here I'd really like to just set it up to as port 80 and have it server.domain and have it resolve to the right address, instead of http://server.domain:8080/alfresco

Find more posts tagged with

Comments

mholmes

I tried that, and I still was able to get the "IT WORKS" from apache, but absolutely nothing from alfresco anywhere, so I moved it back for now.

Mike

mautidavis

Dear all,

I have the same problem. Any help on this is greatly appreciated.

Regards,
Davis M Onsakia

gronfelt

You could change the port number in server.xml, however, this means that you also have to change a lot of Alfresco config files and of course you cannot run anything else on port 80 at the same time.

A far better solution, in my opinion, is to use Apache along with mod_jk as a proxy.

mautidavis

Please can you supply for information on this. I have not yet sorted out this issue.

Find below a portion of my catalina.out log file:

Aug 14, 2009 3:08:45 PM org.apache.coyote.http11.Http11Protocol init
INFO: Initializing Coyote HTTP/1.1 on http-8080
Aug 14, 2009 3:08:45 PM org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 421 ms
Aug 14, 2009 3:08:45 PM org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
Aug 14, 2009 3:08:45 PM org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/6.0.18
Aug 14, 2009 3:08:45 PM org.apache.catalina.startup.HostConfig deployWAR
INFO: Deploying web application archive alfresco.war
Aug 14, 2009 3:08:46 PM org.apache.catalina.core.StandardContext addApplicationListener
INFO: The listener "org.apache.myfaces.webapp.StartupServletContextListener" is already configured for this context. The duplicate definition has been ignored.
15:08:58,540  INFO  [config.xml.XMLConfigService$PropertyConfigurer] Loading properties file from class path resource [alfresco/file-servers.properties]
15:09:05,932  INFO  [domain.schema.SchemaBootstrap] Schema managed by database dialect org.hibernate.dialect.MySQLInnoDBDialect.
15:09:06,358  INFO  [domain.schema.SchemaBootstrap] No changes were made to the schema.
15:09:07,689 User:System INFO  [repo.admin.ConfigurationChecker] The Alfresco root data directory ('dir.root') is: /opt/alfresco/alf_data
15:09:07,728 User:System INFO  [admin.patch.PatchExecuter] Checking for patches to apply …
15:09:07,897 User:System INFO  [admin.patch.PatchExecuter] No patches were required.
15:09:07,903 User:System INFO  [repo.module.ModuleServiceImpl] Found 1 module(s).
15:09:07,937 User:System INFO  [repo.module.ModuleServiceImpl] Starting module 'org.alfresco.module.vti' version 1.0.
15:09:13,127 User:System ERROR [alfresco.smb.protocol] Failed to get local domain/workgroup name, using default of WORKGROUP
15:09:13,127 User:System ERROR [alfresco.smb.protocol] (This may be due to firewall settings or incorrect <broadcast> setting)
15:09:13,346 User:System WARN  [alfresco.util.OpenOfficeConnectionTester] An initial OpenOffice connection could not be established.
15:09:13,364 User:System INFO  [service.descriptor.DescriptorService] Alfresco JVM - v1.6.0_07-b06; maximum heap size 493.063MB
15:09:13,364 User:System WARN  [service.descriptor.DescriptorService] Alfresco JVM - WARNING - maximum heap size 493.063MB is less than recommended 512MB
15:09:13,364 User:System INFO  [service.descriptor.DescriptorService] Alfresco started (Labs): Current version 3.0.0 (Stable 1526) schema 1002 - Installed version 3.0.0 (Stable 1526) schema 1002
2009-08-14 15:09:13.569::INFO:  Logging to STDERR via org.mortbay.log.StdErrLog
2009-08-14 15:09:13.612::INFO:  jetty-6.1.14
2009-08-14 15:09:13.650::INFO:  Started SocketConnector@0.0.0.0:7070
Aug 14, 2009 3:09:20 PM org.apache.catalina.startup.HostConfig deployWAR
INFO: Deploying web application archive studio.war
15:09:22,786  INFO  [web.scripts.DeclarativeRegistry] Registered 67 Web Scripts (+0 failed), 71 URLs
15:09:22,787  INFO  [web.scripts.AbstractRuntimeContainer] Initialised Presentation Web Script Container (in 264.755ms)
15:10:23,095  INFO  [web.scripts.DeclarativeRegistry] Registered 101 Web Scripts (+0 failed), 105 URLs
15:10:23,096  INFO  [web.scripts.AbstractRuntimeContainer] Initialised WebFramework Web Script Container (in 60295.562ms)
15:10:23,142  INFO  [web.site.FrameworkHelper] Successfully Initialized Web Framework
Aug 14, 2009 3:10:23 PM org.apache.catalina.startup.HostConfig deployWAR
INFO: Deploying web application archive share.war
15:10:25,036  INFO  [web.site.FrameworkHelper] Successfully Initialized Web Framework
Aug 14, 2009 3:10:25 PM org.apache.coyote.http11.Http11Protocol start
INFO: Starting Coyote HTTP/1.1 on http-8080
Aug 14, 2009 3:10:25 PM org.apache.catalina.startup.Catalina start
INFO: Server startup in 99921 ms

‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍

Any help to run Alfresco from port 80 rather than 8080 will be appreciated.

Regards,
Davis Onsakia

gronfelt

I could see no errors regarding this issue in the catalina.out, what exactly is it that isn't working?

Anyway, here is a short introduction on how to use mod_jk with apache:

http://tomcat.apache.org/connectors-doc/generic_howto/quick.html

You also need to enable the AJP connector in Tomcat, by uncommenting this part of server.xml:

    <!– Define an AJP 1.3 Connector on port 8009 –>
        <!–
    <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />
        –>
‍‍‍‍‍

Of course you could also change the port number tomcat uses, from 8080 to 80, but that means that you would also have to locate all places where Alfresco references port 8080, so in my opinion it's easier and safer to use Apache and redirect any requests to port 80 to Tomcat.

mautidavis

"
Of course you could also change the port number tomcat uses, from 8080 to 80, but that means that you would also have to locate all places where Alfresco references port 8080, so in my opinion it's easier and safer to use Apache and redirect any requests to port 80 to Tomcat."

How is this done?

Thanks.
Davis

dannyboy

To forward port 80 requests to port 8080 add the following in Alfresco/tomcat/conf/server.xml

       <Connector port="80" protocol="HTTP/1.1" URIEncoding="UTF-8"
      connectionTimeout="20000"
      redirectPort="8080"
      />
‍‍‍‍‍

above:

      <Connector port="8080" protocol="HTTP/1.1" URIEncoding="UTF-8"
      connectionTimeout="20000"
      />
‍‍‍‍‍

Edit: and the above poster is right, we need to keep 8080, you delete it. I am not sure where it is referenced in Alfresco's Java classes, but it is.

gronfelt

Would that work? I thought that the redirectPort attribute was used to redirect SSL traffic?

However, if it works it's probably the easiest solution.

Should it not work, then you'd have to go with using Apache with mod_jk. The document I previously linked to pretty much describes how to set it up. In a basic environment the config described could be used as it is. The only thing that needs to be changed is the mount point in tomcat. This should be:

JkMount /* worker1‍

If you are planning on using both the Alfresco Explorer and Alfresco Share clients. You could then navigate to http://yourservername/alfresco or http://yourservername/share. If you only plan to use either one of the clients you could set the mount point to

JkMount /alfresco/* worker1‍

JkMount /share/* worker1‍

Depending on what client you want to use. You could then navigate to that client directly with just http://yourservername/.

There's also a forum thread describing the entire procedure, from installation of mod_jk to a working configuration:

http://forums.alfresco.com/en/viewtopic.php?f=9&t=20310

Please feel free to ask if you get stuck with anything.

yaziderman

Dear Friends,
The solution of belmekki works well for me, but it commits changes on the main server, isn't there a way to make it as an extention? means to include it to the extention files, to be able to upgrade the system without problems?

peterz

Hi all,

I would like to make alfresco accessible on port 80 so that no port number has to be added. No other services are running on port 80 so no problem there.
In Alfresco\tomcat\conf\server.xml I have this:

    <Connector port="80" URIEncoding="UTF-8" protocol="HTTP/1.1" 
               connectionTimeout="20000" 
               redirectPort="8443" />‍‍‍

After a restart, I get a page with 2 input fields and a 'Submit Query' button; could this be due the redirect port?

Running CE 4.0 on windows 2k3 R2, firewall is disabled.

TIA
P.

EDIT
I have also tried with the redirecPort="8080" setting but then I get this error:

A server error has occured.

There are a number of reasons why this could have happened:

    You have attempted to access a page that does not exist - check the URL in the address bar.
    You have attempted to access a page that is not accessable to you, such as a private Site dashboard.
    A valid page has been requested but the server was unable to render it due to an internal error - contact your administrator.

According to the tomcat 6 information that I've found, it should be like that in the server.xml file but I guess that's in a different scenario - have very basic experience with apache/tomcat.